跳转到主内容

配件

没有特定配件。

  1. Remove the fourteen 3.75mm screws with a Phillips #0 Screwdriver as shown.
    • Remove the fourteen 3.75mm screws with a Phillips #0 Screwdriver as shown.

  2. Gently pull out the battery.
    • Gently pull out the battery.

  3. Using a spudger, poke the white tabs in by the battery until you hear a click. Separate the laptop by sliding a spudger in between the black and silver covers. Be sure to use ESD-safe tools, we recommend the iFixit toolkit.
    • Using a spudger, poke the white tabs in by the battery until you hear a click.

    • Separate the laptop by sliding a spudger in between the black and silver covers.

    • Be sure to use ESD-safe tools, we recommend the iFixit toolkit.

  4. Using the #0 Phillips Head, unscrew the two 3.75mm screws connecting the USB Port Circuit Board to the hard drive and remove the USB Port Circuit Board as shown.
    • Using the #0 Phillips Head, unscrew the two 3.75mm screws connecting the USB Port Circuit Board to the hard drive and remove the USB Port Circuit Board as shown.

结论

To reassemble your device, follow these instructions in reverse order.

Tori Ryals

于2016年10月11日注册

41 信誉积分

创作了2篇指南

团队

USF Tampa, Team 1-4, Leahy Fall 2016 USF Tampa, Team 1-4, Leahy Fall 2016 的会员

USFT-LEAHY-F16S1G4

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 291