跳转到主内容
  1. Remove the fourteen 3.75mm screws with a Phillips #0 Screwdriver as shown.
    • Remove the fourteen 3.75mm screws with a Phillips #0 Screwdriver as shown.

  2. Gently pull out the battery.
    • Gently pull out the battery.

  3. Using a spudger, poke the white tabs in by the battery until you hear a click.
    • Using a spudger, poke the white tabs in by the battery until you hear a click.

    • Separate the laptop by sliding a spudger in between the black and silver covers.

    • Be sure to use ESD safe tools, we recommend using the iFixit Pro Tech Toolkit.

  4. Disconnect the Cooling Fan from the Motherboard by gently pulling away on the white tab.
    • Disconnect the Cooling Fan from the Motherboard by gently pulling away on the white tab.

  5. Unscrew the two 3.75mm screws around the Cooling Fan and the copper attachment as shown with the #0 Phillip's Head screwdriver.
    • Unscrew the two 3.75mm screws around the Cooling Fan and the copper attachment as shown with the #0 Phillip's Head screwdriver.

  6. Remove the attachment from the Processor by gently rotating and lifting.
    • Remove the attachment from the Processor by gently rotating and lifting.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Brendan Sweeney

于2016年10月11日注册

179 信誉积分

创作了2篇指南

团队

USF Tampa, Team 1-4, Leahy Fall 2016 USF Tampa, Team 1-4, Leahy Fall 2016 的会员

USFT-LEAHY-F16S1G4

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 6

总计 445