跳转到主内容

修复你的物品

维修的权力

商店

简介

How to replace the Keyboard on Toshiba Satellite, series 850.

The video manual is for cleaning the cooling system, but you can follow it, because at the beginning you can see how to disassemble the keyboard.


Please SUBSCRIBE to my channel ツ

配件

没有特定配件。

视频概述

  1. Switch-off the laptop and remove the battery. Switch-off the laptop and remove the battery.
    • Switch-off the laptop and remove the battery.

  2. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them.
    • The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them.

  3. Disconnect the old Keyboard and you are ready to install the new one. To remove or re-insert the keyboard ribbon, simply flip the locking clip upwards to unlock and downwards to lock the ribbon. Alternatively, you may pull it outwards with a fingernail.
    • Disconnect the old Keyboard and you are ready to install the new one.

    • To remove or re-insert the keyboard ribbon, simply flip the locking clip upwards to unlock and downwards to lock the ribbon. Alternatively, you may pull it outwards with a fingernail.

    • .

    • Please SUBSCRIBE to my channel ツ

结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

ZFix

于2013年12月09日注册

174,593 信誉积分

创作了313篇指南

团队

Master Techs Master Techs 的会员

Community

294 名成员

创作了961篇指南

Where does the 4-pin ribbon cable for a backlit keyboard connect?

thomja1 - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 21

过去的30天: 81

总计 10,843