跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide will aid in replacing a faulty DC power jack. A faulty power jack will prevent the laptop from conducting a charge.

配件

没有特定配件。

  1. Using the Phillips Head #0 Screwdriver, remove one 3mm Phillips #0 screw as indicated.
    • Using the Phillips Head #0 Screwdriver, remove one 3mm Phillips #0 screw as indicated.

  2. Remove hard drive cover. Using the Phillips Head #0 Screwdriver, remove seven 3mm Phillips #0 screws as indicated.
    • Remove hard drive cover. Using the Phillips Head #0 Screwdriver, remove seven 3mm Phillips #0 screws as indicated.

  3. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  4. Using the Phillips Head #0 Screwdriver, remove twelve 3mm Phillips #0 screw as indicated.
    • Using the Phillips Head #0 Screwdriver, remove twelve 3mm Phillips #0 screw as indicated.

  5. Using the plastic spudger, pry the back off along the periphery  of the laptop. Using the plastic spudger, pry the back off along the periphery  of the laptop.
    • Using the plastic spudger, pry the back off along the periphery of the laptop.

  6. Remove the DC power jack from its plastic retaining piece, just inside of the charger inlet. Remove the DC power jack from its plastic retaining piece, just inside of the charger inlet.
    • Remove the DC power jack from its plastic retaining piece, just inside of the charger inlet.

  7. Use the nylon spudger to remove the connecting wires from the motherboard.  Insert the spudger between the terminal plastic piece of the wire and its retaining clip on the mother board. The wire should release without much force. Use the nylon spudger to remove the connecting wires from the motherboard.  Insert the spudger between the terminal plastic piece of the wire and its retaining clip on the mother board. The wire should release without much force.
    • Use the nylon spudger to remove the connecting wires from the motherboard. Insert the spudger between the terminal plastic piece of the wire and its retaining clip on the mother board. The wire should release without much force.

结论

To reassemble your device, follow these instructions in reverse order.

Patrick Kroenung

于2017年01月12日注册

122 信誉积分

撰写一个指南

团队

I got a power jack from seller dcincable.com, it's exactly the same as your images show, but I could not find a service manual, it's great to have your help, thank you so much.

Tom - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 12

总计 525