跳转到主内容

简介

If your battery is not working and you need to take it out, do the following steps to remove it properly.

  1. Make sure you turn off the laptop before starting. Remove the two 6.5mm PH1 Phillips screws securing the battery. Remove the two 6.5mm PH1 Phillips screws securing the battery.
    • Make sure you turn off the laptop before starting.

    • Remove the two 6.5mm PH1 Phillips screws securing the battery.

  2. Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily. Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily. Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.
    • Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.

结论

To reassemble your device, follow these instructions in reverse order.

Abdel Feliciano Gonzalez

于2017年02月28日注册

680 信誉积分

创作了4篇指南

团队

USF Tampa, Team S1-G5, Nance Spring 2017 USF Tampa, Team S1-G5, Nance Spring 2017 的会员

USFT-NANCE-S17S1G5

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 22

总计 1,144