简介

In this guide, you will learn how to take off the back cover of the Toshiba Satellite C55-A5302 and replace the HDD.

配件

无需配件。

  1. Power down the laptop and remove all power cords. After this is done, turn the laptop over.
    • Power down the laptop and remove all power cords. After this is done, turn the laptop over.

  2. Slide the battery latches outwards away from the center of the device.
    • Slide the battery latches outwards away from the center of the device.

    • The right latch will slide to the right, and left latch to the left.

  3. Lift and remove the battery from the device.
    • Lift and remove the battery from the device.

  4. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. Use the Phillips #1 screwdriver to unscrew the thirteen screws on the back of your device.
    • Use the Phillips #1 screwdriver to unscrew the thirteen screws on the back of your device.

  6. Remove the middle plastic cover to expose the hard drive.
    • Remove the middle plastic cover to expose the hard drive.

  7. Using the Phillips #1 screwdriver, remove the two screws holding the hard drive in place.
    • Using the Phillips #1 screwdriver, remove the two screws holding the hard drive in place.

  8. Remove the three screws using the Phillips #1 screwdriver.
    • Remove the three screws using the Phillips #1 screwdriver.

    • Insert you fingers into the rubber ends and gently pull the hard drive out of the device.

结论

To reassemble your device, follow these instructions in reverse order.

Nicole Hague

于2018年04月10日注册

548 信誉积分

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 9

总计 99