简介

Use this guide to replace or install RAM in your Toshiba laptop.

Power off the laptop.
  • Power off the laptop.

  • Disconnect the power cable from the laptop. If you do not, electric shock may result.

添加评论

Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.
  • Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.

  • Unlock the battery by sliding the tab shown to the right.

    • This tab will latch into place.

添加评论

  • Slide the tab shown to the left and remain holding it.

    • This tab does not lock into place like in the first step.

  • Place your thumb on the grips of the battery as shown.

    • While holding onto the grips, pull the battery towards you and away from the laptop.

添加评论

  • Loosen this 5 mm Phillips #0 screw found in the center of the lower case. Use the Phillips #0 screwdriver.

    • The screw will not come out completely, it will stay connected to the center plate.

添加评论

  • Remove the center plate by lifting it and sliding it to the right.

  • If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that the screw is loose before attempting again.

添加评论

  • The computer should be open with many of the internal components shown. You can now access the RAM, and wireless card.

添加评论

  • Push the two white tabs away from the RAM. The left side of the RAM should pop out of its holder.

添加评论

  • Pull the RAM out of the dock by lifting it from the left side and sliding it towards the left.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Travis

于2013年04月13日注册

13 信誉积分

创作了5篇指南

团队

Cal Poly, Team 10-38, Amido Spring 2013 Cal Poly, Team 10-38, Amido Spring 2013 的会员

CPSU-AMIDO-S13S10G38

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 744