简介

Use this guide to remove, replace or install the keyboard of your Toshiba laptop.

  1. Power off the laptop.
    • Power off the laptop.

    • Disconnect the power cable from the laptop. If you do not, electric shock may result.

    添加评论

  2. Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.
    • Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.

    • Unlock the battery by sliding the tab shown to the right

      • This tab will latch into place.

    添加评论

    • Slide the tab shown to the left and remain holding it.

      • This tab does not lock into place like in the first step.

    • Place your thumb on the grips of the battery as shown.

      • While holding onto the grips, pull the battery towards you and away from the laptop.

    添加评论

    • Flip the laptop over so that the front tab of the laptop faces you.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unlock the laptop by sliding the front tab to the right.

      • Open the laptop by lifting the screen up while holding the tab in place.

    添加评论

    • Place the laptop on its left side with the disk drive facing up and the screen open completely.

    • Locate the rectangular slot on the side of the laptop just above the disk drive.

      • Insert the flat end of the spudger into the rectangular slot.

    添加评论

    • Insert the opening tool into the rectangular slot with the spudger.

    • Pry off the top part of the laptop's case (above the keyboard) containing the speakers by using both the spudger and opening tool to push the case away from the computer.

    • Once the top part of the laptop's case has been popped off, use your hands to remove it.

    添加评论

    • Place the laptop on a level surface with the keyboard facing you.

    添加评论

    • Remove the two 5mm Phillips #1 screws which hold the keyboard in place.

    添加评论

    • Unhook the plastic tab at the top of the keyboard using the plastic opening tool to pry the top of the keyboard up.

    添加评论

    • Lift up the keyboard from the back end where the function keys are located.

    • Slide the keyboard out towards the screen.

    • Be careful not to rip the ribbon out of its port.

      • This may damage your laptop.

    添加评论

    • Pull the ribbon wire attaching the keyboard to the computer out of its port.

      • Before you pull try to hold the ribbon wire as close to the port as possible to prevent it from breaking.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Alana

于2013年04月14日注册

75 信誉积分

创作了3篇指南

团队

Cal Poly, Team 10-38, Amido Spring 2013 Cal Poly, Team 10-38, Amido Spring 2013 的会员

CPSU-AMIDO-S13S10G38

4 名成员

创作了8篇指南

This absolutely one of the best help guides I have ever used.

Lenny - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 4

总计 753