Remove the 5.75 mm screw from the cover panel. Turn the laptop over with the screen facing down.
  • Remove the 5.75 mm screw from the cover panel.

  • Turn the laptop over with the screen facing down.

添加评论

Lift up the cover panel using a plastic opening tool.
  • Lift up the cover panel using a plastic opening tool.

添加评论

Remove the 5.64 mm screw from the bottom of the crossing bar. Remove the crossing bar.
  • Remove the 5.64 mm screw from the bottom of the crossing bar.

  • Remove the crossing bar.

添加评论

Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card. Note that the black wire is connected to the port that is labeled main.
  • Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card.

    • Note that the black wire is connected to the port that is labeled main.

添加评论

Use fingers to push the clips away from memory card. Use fingers to push the clips away from memory card.
  • Use fingers to push the clips away from memory card.

添加评论

Use fingers to remove the Wi-Fi card.
  • Use fingers to remove the Wi-Fi card.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Garrett Gudgel

于2010年10月05日注册

714 信誉积分

创作了13篇指南

团队

Cal Poly, Team 4-43, Amido Fall 2010 Cal Poly, Team 4-43, Amido Fall 2010 的会员

CPSU-AMIDO-F10S4G43

5 名成员

创作了13篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 2

过去的30天: 4

总计 3,037