Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.
  • Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.

  • It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.

添加评论

Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
  • Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

添加评论

  • Remove the two 3.67 mm screws from the top corners of the keyboard.

添加评论

  • Use fingers to lift up the keyboard from the top.

  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

添加评论

  • Remove the cable connecting the keyboard with the motherboard.

  • Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.

  • Lift up and remove the keyboard.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Garrett Gudgel

于2010年10月05日注册

714 信誉积分

创作了13篇指南

团队

Cal Poly, Team 4-43, Amido Fall 2010 Cal Poly, Team 4-43, Amido Fall 2010 的会员

CPSU-AMIDO-F10S4G43

5 名成员

创作了13篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 3,960