跳转到主内容

简介

This replacement guide is to walk you through a hard drive replacement on your Toshiba Satellite A660-ST3NX2X. Before starting this replacement, make sure you have a replacement hard drive that is made for this computer and model. Also, make sure the computer is powered off and completely shut down before completing this replacement.

  1. Unplug all cables and other devices from the computer before starting this replacement.
    • Unplug all cables and other devices from the computer before starting this replacement.

    • Turn the computer over, so the screen is facing down and the battery is positioned in front of you.

  2. Locate the two sliding tabs on either side of the battery. Using both hands, place one finger on each tab and slide them to the sides and away from each other.
    • Locate the two sliding tabs on either side of the battery.

    • Using both hands, place one finger on each tab and slide them to the sides and away from each other.

  3. Pull the battery out, keeping the tabs pushed to the side. The right tab on this laptop stayed pushed to the right without needing to be held in place. The right tab on this laptop stayed pushed to the right without needing to be held in place.
    • Pull the battery out, keeping the tabs pushed to the side.

    • The right tab on this laptop stayed pushed to the right without needing to be held in place.

  4. Unplug all devices from your computer and power down the device completely.
    • Unplug all devices from your computer and power down the device completely.

    • Flip the computer over so the screen is facing down.

    • In the image, the hard drive will appear to be in the top right corner where the box indicates.

  5. Use a J00 bit to unscrew the single 4mm screw that holds the hard drive cover in place. Use a J00 bit to unscrew the single 4mm screw that holds the hard drive cover in place.
    • Use a J00 bit to unscrew the single 4mm screw that holds the hard drive cover in place.

  6. Remove the cover that holds the hard drive in place. Remove the hard drive.
    • Remove the cover that holds the hard drive in place.

    • Remove the hard drive.

    • This computer contains no hard drive, therefore we are unable to show the physical removal of it.

结论

To reassemble your device, follow these instructions in reverse order.

Cassie Pickett

于2017年03月20日注册

201 信誉积分

创作了2篇指南

团队

Texas Tech, Team S8-G1, Bennett Spring 2017 Texas Tech, Team S8-G1, Bennett Spring 2017 的会员

TTU-BENNETT-S17S8G1

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 316