简介

This is a step by step guide of how to replace the speakers in case of malfunction or upgrade.

  1. Flip the laptop over so the bottom is facing up.
    • Flip the laptop over so the bottom is facing up.

    • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

    添加评论

  2. Gently lift the battery out of the computer.
    • Gently lift the battery out of the computer.

    添加评论

    • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

    添加评论

    • Remove the WIFI module cover. It will pull right off.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unplug the white and black wires from the WiFi module.

    添加评论

    • Remove the twelve 8mm button head Phillips #00 B8 screws.

    • Remove the two 14 mm button head Phillips #00 B14 screws.

    • Remove the two 10 mm Phillips #00 battery compartment screws.

    • Remove the two 8 mm Phillips #00 screws.

    添加评论

    • Remove the seven 4mm flat Phillips #00 screws.

    • Remove the seven 20mm button head Phillips #00 screws.

    添加评论

    • Use the plastic opening tool to pry the two halves apart.

    添加评论

    • Locate the plug for the speaker wires on the bottom of the laptop.

    添加评论

    • Unplug the speaker wire connector.

    添加评论

    • Remove the speakers by sliding them straight up. They should slide out with ease.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Cole Uhland

于2013年09月30日注册

216 信誉积分

创作了2篇指南

团队

Cal Poly, Team 14-8, Forte Fall 2013 Cal Poly, Team 14-8, Forte Fall 2013 的会员

CPSU-FORTE-F13S14G8

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 321