跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide provides step by step instructions of how to replace a faulty optical drive.

  1. Flip the laptop over so the bottom is facing up.
    • Flip the laptop over so the bottom is facing up.

    • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

  2. Gently lift the battery out of the computer.
    • Gently lift the battery out of the computer.

  3. Remove the single 3mm Phillips #00 screw that secures the wireless card cover.
    • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

  4. Remove the WIFI module cover. It will pull right off.
    • Remove the WIFI module cover. It will pull right off.

  5. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  6. Unplug the white and black wires from the WiFi module. Unplug the white and black wires from the WiFi module.
    • Unplug the white and black wires from the WiFi module.

  7. Remove the twelve 8mm button head Phillips #00 B8 screws.
    • Remove the twelve 8mm button head Phillips #00 B8 screws.

    • Remove the two 14 mm button head Phillips #00 B14 screws.

    • Remove the two 10 mm Phillips #00 battery compartment screws.

    • Remove the two 8 mm Phillips #00 screws.

  8. Remove the seven 4mm flat Phillips #00 screws.
    • Remove the seven 4mm flat Phillips #00 screws.

    • Remove the seven 20mm button head Phillips #00 screws.

  9. Use the plastic opening tool to pry the two halves apart.
    • Use the plastic opening tool to pry the two halves apart.

  10. Orient the bottom assembly as displayed.
    • Orient the bottom assembly as displayed.

  11. Remove the two 3 mm Phillips #00 screws. Remove the two 3 mm Phillips #00 screws.
    • Remove the two 3 mm Phillips #00 screws.

  12. Slide the optical drive out of the laptop through the opening on the left side of the bottom assembly.
    • Slide the optical drive out of the laptop through the opening on the left side of the bottom assembly.

结论

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

于2013年09月30日注册

81,518 信誉积分

创作了89篇指南

Or, simply remove the screw (the center one in this photo) from the bottom case that holds the bracket in and pull the drive out.

J Howard Markley - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 723