简介

If your CDs or DVDs are not running correctly or at all on your computer, then it is either due to the disc drive being dirty, loose parts and/or broken. This guide will show the user how to safely remove the disc drive.

  1. Make sure your computer is turned off and the computer is not plugged in.
    • Make sure your computer is turned off and the computer is not plugged in.

    • Turn your laptop upside down, and slide the right release tab outward.

    • Using you left hand, hold the left release tab towards the left side and then pull the battery out.

    添加评论

  2. Loosen the screw located on the cover of the RAM using Phillips #1 screwdriver.
    • Loosen the screw located on the cover of the RAM using Phillips #1 screwdriver.

    • You will not be able to remove the screw from the panel as it is designed to stay in the panel.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • With your fingers, carefully remove the middle panel by lifting the edge with the indent.

    添加评论

    • Remove the 4.0 mm screw above the small metal tab with a Phillips 00 screwdriver.

    添加评论

    • Push down on the metal tab under the cover with the plastic opening tool and push the disc drive partially out.

    • Grab the drive and pull it out of the laptop.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

pfedigan

于2013年04月12日注册

11 信誉积分

创作了4篇指南

团队

Cal Poly, Team 2-23, Maness Spring 2013 Cal Poly, Team 2-23, Maness Spring 2013 的会员

CPSU-MANESS-S13S2G23

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 6

总计 553