修复你的物品

维修的权力

商店

该版本可能包含错误编辑。跳转到最新已认证的截图。

撰写者： Josh (和另外2个贡献者)
  • 评论： 0
  • 收藏 0
  • 完成 1

难度

中等

步骤

7

所需时间

15 - 20 分钟

节

2

  • 4个步骤
  • 3个步骤

标志

1

Better Introduction

更好的介绍

通过完成或修改其开头介绍以改善本指南。

  1. 这个步骤还没有翻译 帮忙翻译一下

    Flip the laptop over so it is rightside up, and open the laptop all the way so that the screen is horizontal.

    • Flip the laptop over so it is rightside up, and open the laptop all the way so that the screen is horizontal.

    翻译

  2. 这个步骤还没有翻译 帮忙翻译一下

    Using the plastic opening tool, pry off the panel above the keyboard, starting near the right front speaker. Use the plastic opening tool to pop off tabs along the length of this panel. This may feel like you're about to break something, but as long as you work your way down the panel and don't yank it out, the laptop will be fine.

    • Using the plastic opening tool, pry off the panel above the keyboard, starting near the right front speaker.

    • Use the plastic opening tool to pop off tabs along the length of this panel.

    • This may feel like you're about to break something, but as long as you work your way down the panel and don't yank it out, the laptop will be fine.

    翻译

  3. 这个步骤还没有翻译 帮忙翻译一下

    Unscrew the two 4.5 mm screws holding the keyboard on with the Phillips #1 screwdriver. Unscrew the two 4.5 mm screws holding the keyboard on with the Phillips #1 screwdriver.

    • Unscrew the two 4.5 mm screws holding the keyboard on with the Phillips #1 screwdriver.

    翻译

  5. 这个步骤还没有翻译 帮忙翻译一下

    Lift the keyboard gently from the side closest the screen. Pull out the ribbon connecting the keyboard to the laptop. Pull out the ribbon connecting the keyboard to the laptop.

    • Lift the keyboard gently from the side closest the screen.

    • Pull out the ribbon connecting the keyboard to the laptop.

    翻译

  6. 这个步骤还没有翻译 帮忙翻译一下

    Disconnect wire attaching LCD to motherboard Using the Phillips screwdriver remove the two 4.0mm screws from each hinge above speakers Partially close the lid and remove the last two 4.0mm screws from the back of the laptop.

    • Disconnect wire attaching LCD to motherboard

    • Using the Phillips screwdriver remove the two 4.0mm screws from each hinge above speakers

    • Partially close the lid and remove the last two 4.0mm screws from the back of the laptop.

    翻译

  7. 这个步骤还没有翻译 帮忙翻译一下

    Remove the seventeen 4.5mm phillips screws on the bottom of the laptop. Using the pry tool separate the two halves of the laptop base.

    • Remove the seventeen 4.5mm phillips screws on the bottom of the laptop.

    • Using the pry tool separate the two halves of the laptop base.

    • Use caution when separating the laptop halves as they are still connected by two ribbon cables.

    翻译

  8. 这个步骤还没有翻译 帮忙翻译一下

    Lift the top half of the case enough to get your hand beneath it, and then remove the two ribbon cables that connect it to the motherboard. Lift the top half of the case enough to get your hand beneath it, and then remove the two ribbon cables that connect it to the motherboard.

    • Lift the top half of the case enough to get your hand beneath it, and then remove the two ribbon cables that connect it to the motherboard.

    翻译
终点

另外一个人完成了本指南。

作者

与2其他贡献者

Josh

于2014年03月12日注册

625 信誉积分

创作了5篇指南

徽章: 8

+ 5更多徽章

团队

UMass Dartmouth, Team 1-6, Cichon Spring 2014 UMass Dartmouth, Team 1-6, Cichon Spring 2014 的会员

UMASSD-CICHON-S14S1G6

3 名成员

创作了6篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 5

总计 737