简介

This guide will show you how to remove the current RAM module from this laptop and how to re-install a RAM module. Accessing the RAM in this computer is straightforward and requires minimal minimal dis-assembly.

  1. Turn the laptop over and locate the lock  and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.
    • Turn the laptop over and locate the lock and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.

    添加评论

  2. Hold the release switch and pull out the battery towards you.
    • Hold the release switch and pull out the battery towards you.

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Locate the screw that is holding the back cover in place and, unscrew it using the #1 Phillips Screwdriver.

    • This screw cannot be taken out, it is a "captive" screw.

    添加评论

    • Using a plastic opening tool, pop off the back cover. Your going to insert the tool into the small slit located on the back cover piece.

    • Be careful when prying the back cover off because you may damage the cover or crack the plastic.

    添加评论

    • Locate the RAM (green module pictured here), and the two prongs on each side of the module. Press the two prongs outwardly, and pull out the RAM module.

    • Grounding yourself may be a good idea before actually touching the RAM module. This entails touching a conductive metal in order to remove any excess static energy in your body.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Lucas Salisbury

于2013年04月18日注册

49 信誉积分

创作了3篇指南

团队

Cal Poly, Team 4-14, Maness Spring 2013 Cal Poly, Team 4-14, Maness Spring 2013 的会员

CPSU-MANESS-S13S4G14

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 9

总计 769