跳转到主内容

简介

Upgrading the RAM is a straightforward process that can significantly improve performance.

Two RAM slots allow up to 512MB of PC1600 DDR SDRAM.

配件

没有特定配件。

  1. The RAM access panel is located near the middle of the bottom. The RAM access panel is located near the middle of the bottom.
    • The RAM access panel is located near the middle of the bottom.

  2. Unscrew the single screw labeled F4 on the panel.
    • Unscrew the single screw labeled F4 on the panel.

  3. Using a spudger, inserted into the notch under the screw hole, pry open and remove the cover.
    • Using a spudger, inserted into the notch under the screw hole, pry open and remove the cover.

  4. Pull outward on each pair of restraining clips to free each chip. Pull outward on each pair of restraining clips to free each chip.
    • Pull outward on each pair of restraining clips to free each chip.

  5. The RAM chips can now be pulled out. This laptop supports a maximum of two memory modules. The largest capacity for each is 256MB of PC1600 DDR SDRAM.
    • The RAM chips can now be pulled out.

    • This laptop supports a maximum of two memory modules. The largest capacity for each is 256MB of PC1600 DDR SDRAM.

结论

To reassemble your device, follow these instructions in reverse order.

Kiril Lange

于2014年09月22日注册

943 信誉积分

创作了9篇指南

团队

USF Tampa, Team 3-2, Brown Fall 2014 USF Tampa, Team 3-2, Brown Fall 2014 的会员

USFT-BROWN-F14S3G2

3 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 165