跳转到主内容

简介

This guide gives instructions on how to remove the fuse located on the yellow motherboard of the Toshiba SD-K740 DVD player.

  1. Make sure the DVD player is unplugged before beginning.
    • Make sure the DVD player is unplugged before beginning.

    • Remove the three .303 inch screws from the back panel using a #0 Phillips head screwdriver.

  2. Turn the DVD player on its side. Remove the .303 inch screw.
    • Turn the DVD player on its side.

    • Remove the .303 inch screw.

    • Now flip the DVD player onto its other side.

    • Remove the .303 inch screw from this side.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Flip the DVD player over onto it's front face.
    • Flip the DVD player over onto it's front face.

    • Remove the back panel by lifting up and pulling it towards yourself.

  5. Use the plastic opening tool to gently pop the fuse out of the restraining brackets. Use the plastic opening tool to gently pop the fuse out of the restraining brackets.
    • Use the plastic opening tool to gently pop the fuse out of the restraining brackets.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

John Lokker

于2011年01月20日注册

319 信誉积分

创作了3篇指南

团队

Cal Poly, Team 1-16, Amido Winter 2011 Cal Poly, Team 1-16, Amido Winter 2011 的会员

CPSU-AMIDO-W11S1G16

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

总计 3,486