跳转到主内容
  1. Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.
    • Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.

  2. Locate hidden screw found in the middle of back hardcover.
    • Locate hidden screw found in the middle of back hardcover.

    • Found under rubber covering shown in picture.

    • Remove the single Torx Security screw using a TR7 screwdriver.

  3. Peel off hard cover to expose interior of device.
    • Peel off hard cover to expose interior of device.

  4. Find the solid-state drive located below the battery, and next to the RAM.
    • Find the solid-state drive located below the battery, and next to the RAM.

    • Unscrew the two 1mm screws located at the top of the solid-state drive with a Phillips #1 screwdriver.

  5. Pull the solid-state drive from its socket
    • Pull the solid-state drive from its socket

    • The solid-state drive should automatically pop-up from its housing once the screws are removed.

结论

To reassemble your device, follow these instructions in reverse order.

Dominic Whiting

于2018年02月08日注册

848 信誉积分

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 12

总计 279