配件

无需配件。

  1. Make sure the device is off to prevent data loss. Slide both latches to the unlocked position to release the battery.
    • Make sure the device is off to prevent data loss.

    • Slide both latches to the unlocked position to release the battery.

    • Switch the latch on the right to reveal red. The latch on the left needs to be held.

    • Pull the battery toward you while holding the left latch.

  2. Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.
    • Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Pull up on the back casing and remove it, revealing the Wi-Fi card.
    • Pull up on the back casing and remove it, revealing the Wi-Fi card.

  5. Unscrew the two 3.5 mm screws from the Wi-Fi card with the Phillips 00 screwdriver. Pull the Wi-Fi card towards the battery slot to release it.
    • Unscrew the two 3.5 mm screws from the Wi-Fi card with the Phillips 00 screwdriver.

    • Pull the Wi-Fi card towards the battery slot to release it.

  6. Remove the three wires from the Wi-Fi card by pulling them straight up and off.
    • Remove the three wires from the Wi-Fi card by pulling them straight up and off.

    • The Wi-Fi card should now be free of the laptop.

    • When removing the wires be sure to remember which wire came from which port, consider marking them so that you can remember.

结论

To reassemble your device, follow these instructions in reverse order.

JRJones

于2013年04月19日注册

121 信誉积分

创作了5篇指南

团队

Cal Poly, Team 2-19, Maness Spring 2013 Cal Poly, Team 2-19, Maness Spring 2013 的会员

CPSU-MANESS-S13S2G19

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 941