跳转到主内容
  1. Make sure the device is off to prevent data loss. Slide both latches to the unlocked position to release the battery.
    • Make sure the device is off to prevent data loss.

    • Slide both latches to the unlocked position to release the battery.

    • Switch the latch on the right to reveal red. The latch on the left needs to be held.

    • Pull the battery toward you while holding the left latch.

  2. Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.
    • Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Pull up on the back casing and remove it, revealing the audio/usb port. Pull up on the back casing and remove it, revealing the audio/usb port.
    • Pull up on the back casing and remove it, revealing the audio/usb port.

  5. Remove the single 4 mm screw holding the port in place with the Phillips 00 screwdriver.
    • Remove the single 4 mm screw holding the port in place with the Phillips 00 screwdriver.

  6. Use the plastic opening tool to disconnect the port from its power source on the laptop. This will be the wire connector with the white connection.
    • Use the plastic opening tool to disconnect the port from its power source on the laptop. This will be the wire connector with the white connection.

  7. Remove the ribbon cable from the port to free it from the laptop.
    • Remove the ribbon cable from the port to free it from the laptop.

    • Be careful when reconnecting the ribbon cable, it can be difficult.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

JRJones

于2013年04月19日注册

121 信誉积分

创作了5篇指南

团队

Cal Poly, Team 2-19, Maness Spring 2013 Cal Poly, Team 2-19, Maness Spring 2013 的会员

CPSU-MANESS-S13S2G19

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 781