简介

In this guide, you will learn how to disassemble the broken/damaged keyboard from the rest of the laptop as well as how to replace it. This guide will also teach you what the proper and necessary tools are for this repair.

  1. Remove the front face plate with a plastic opening tool.
    • Remove the front face plate with a plastic opening tool.

    • Use a #1 Phillips screwdriver to unscrew and remove the two 3.8mm screws labeled B3.

  2. Use your hands to lift the keyboard toward you starting from the edge closest to the screen.
    • Use your hands to lift the keyboard toward you starting from the edge closest to the screen.

    • This ribbon still connects the taptor to the keyboard.

    • Gently place the keyboard on top of the trackpad with the keys side down.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Find the white ribbon connector (where the keyboard is still attached to the rest of the laptop). Remove the screw on the metal plate that keeps the ribbon from sliding out. Gently remove the metal plate and set it aside.
    • Find the white ribbon connector (where the keyboard is still attached to the rest of the laptop).

    • Remove the screw on the metal plate that keeps the ribbon from sliding out.

    • Gently remove the metal plate and set it aside.

  5. Use the plastic opening tools to dislodge the white ribbon connector from the two clips. Use your fingers to pull out the white ribbon connector.
    • Use the plastic opening tools to dislodge the white ribbon connector from the two clips.

    • Use your fingers to pull out the white ribbon connector.

结论

To reassemble your device, follow these instructions in reverse order.

Varsha Roopreddy

于2013年04月19日注册

1 信誉积分

创作了4篇指南

团队

Cal Poly, Team 4-17, Maness Spring 2013 Cal Poly, Team 4-17, Maness Spring 2013 的会员

CPSU-MANESS-S13S4G17

3 名成员

创作了4篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 772