简介

This guide will go through the steps needed to install a new hard drive.

配件

无需配件。

  1. Turn the computer over onto its back.
    • Turn the computer over onto its back.

    添加评论

  2. Slide the lock on the left side to the unlock position.
    • Slide the lock on the left side to the unlock position.

    • Slide the lock on the right side to the unlock position until there is a clicking sound.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the battery by sliding it out while both locks remain in the unlock position.

    添加评论

    • Turn the computer over onto the back.

    • Use a Phillips head screwdriver to remove the screw from the hard drive cover.

    • One 8.5 mm fine thread screw.

    • Lift and remove the cover.

    添加评论

    • Carefully remove the hard drive from the IDE cable by pulling on the black connector (do not pull the orange cable).

    添加评论

    • Remove the two gray rubber covers from both ends of the hard drive.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Alison Wendt

于2013年04月18日注册

78 信誉积分

创作了6篇指南

团队

Cal Poly, Team 21-51, Johann Spring 2013 Cal Poly, Team 21-51, Johann Spring 2013 的会员

CPSU-JOHANN-S13S21G51

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 1,647