修复你的物品 社区 商店

Toshiba NB305 Keyboard Replacement

简介

When replacing your keyboard make sure that you are not to rough with the removal of the keyboard. Take your time and go slowly or you will run the risk of damaging the laptop. Replacing your keyboard can help with efficiency and make working on your leptop more productive.

你所需要的

  1. Toshiba NB305 Keyboard Replacement, Battery: 步骤 1 中的图像 1，1

    • Place the laptop upside down with the battery facing you.

    编辑

  2. Toshiba NB305 Keyboard Replacement: 步骤 2 中的图像 1，1

    • Use your right hand to move latch 1 to the right to unlock the battery.

    编辑

  3. Toshiba NB305 Keyboard Replacement: 步骤 3 中的图像 1，2 Toshiba NB305 Keyboard Replacement: 步骤 3 中的图像 2，2

    • Use your left hand to hold latch 2 to the left.

    • Simultaneously take the battery out with your right hand.

    编辑

  5. Toshiba NB305 Keyboard Replacement, Keyboard: 步骤 4 中的图像 1，2 Toshiba NB305 Keyboard Replacement, Keyboard: 步骤 4 中的图像 2，2

    • Remove the four F4 screws and the F6 screw underneath battery.

    • 4mm Phillips-0 screws.

    • 6mm Phillips-0 screws.

    编辑

  6. Toshiba NB305 Keyboard Replacement: 步骤 5 中的图像 1，3 Toshiba NB305 Keyboard Replacement: 步骤 5 中的图像 2，3 Toshiba NB305 Keyboard Replacement: 步骤 5 中的图像 3，3

    • Using a spudger, gently pry out on the plastic cover.

    • Turn it over and remove plastic cover on top of laptop with power button on it.

    编辑

  7. Toshiba NB305 Keyboard Replacement: 步骤 6 中的图像 1，2 Toshiba NB305 Keyboard Replacement: 步骤 6 中的图像 2，2

    • Use the plastic opening tool in little notches above the keyboard

    • Gently pry up on the keyboard until it lifts up.

    • You might hear a click when the keyboard releases.

    编辑

  8. Toshiba NB305 Keyboard Replacement: 步骤 7 中的图像 1，1

    • Gently lift the keyboard up toward the screen.

    • Be careful! There is a cable still connected from the computer to the keyboard.

    编辑

  9. Toshiba NB305 Keyboard Replacement: 步骤 8 中的图像 1，2 Toshiba NB305 Keyboard Replacement: 步骤 8 中的图像 2，2

    • The ribbon cable has a clip on each side holding it to the motherboard.

    • Using a spudger, press on the clips to release the cable.

    • The cable will slide out on its own when it is properly released.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Nuri Chung

于10/25/16注册

368 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

USF Tampa, Team 5-5, Lacy Fall 2016 USF Tampa, Team 5-5, Lacy Fall 2016 的会员

USFT-LACY-F16S5G5

3 名成员

创作了15篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 6

过去 30 天： 10

总计 690