1. To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws. Gently lift the panel off.
    • To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.

    • Gently lift the panel off.

  2. With the panel removed, slide the hard drive towards the top of the netbook with moderate force. This will free the hard drive from its original location.
    • With the panel removed, slide the hard drive towards the top of the netbook with moderate force.

    • This will free the hard drive from its original location.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Obtain a new hard drive. Apply firm pressure to secure the new hard drive into the old hard drive's location.
    • Obtain a new hard drive.

    • Apply firm pressure to secure the new hard drive into the old hard drive's location.

  5. Place the back panel in its original position. Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.
    • Place the back panel in its original position.

    • Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.

终点

另外一个人完成了本指南。

Mason McCaskill

于2013年10月18日注册

943 信誉积分

创作了9篇指南

团队

Clemson, Team 14-2, Benson Fall 2013 Clemson, Team 14-2, Benson Fall 2013 的会员

CLEM-BENSON-F13S14G2

3 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 16

总计 1,793