Toshiba Encore WT8-A Battery Replacement

步骤 1 Battery

• Use the metal spudger to create a gap between the back cover and the device.
• Be gentle when using the metal spudger so that the casing is not damaged.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2



• Use the nylon spudger to completely separate the back of the device.
• Take the nylon spudger around the outside of the device cover until it comes free.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Use the Phillips head PH0 to remove the 7 battery screws.
• The 5 side screws measure 3.5mm.
• The 2 top and bottom screws measure 4.5 mm.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4

在这个步骤中使用的工具：
Tweezers
$4.99
购买
• To disconnect the cable, use the fine tweezers to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.
• Be sure you are prying up on the hinged retaining flap, not the connector itself.
• The zero insertion force (ZIF) connector is used to secure delicate ribbon cables, such as this trackpad cable.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5
• Remove the colored power cable from its connector.
• To disconnect it safely, use the pointed tip of a spudger to carefully push on each side of the connector.
• Alternating from one side to the other, gently “walk” the connector out of its socket.
• Be sure to be very gentle when prying colored wires from motherboard to ensure that there is no damage.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• Battery will lift out of the device.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与4其他贡献者

Zachary Armstrong

于09/15/16注册

293 声望

创作了2篇指南

徽章: 13

• 
• 
• 

+ 10更多徽章

团队

USF Tampa, Team 17-4, Blackwell Fall 2016 USF Tampa, Team 17-4, Blackwell Fall 2016 的会员

USFT-BLACKWELL-F16S17G4

3 名成员

创作了8篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览