跳转到主内容

简介

Antennas in RC cars can be bent/broken during use. Fortunately, replacing the antenna on the Torque King is easy.

配件

没有特定配件。

  1. From the top view, remove each of the four pins that hold the casing in place. From the top view, remove each of the four pins that hold the casing in place.
    • From the top view, remove each of the four pins that hold the casing in place.

  2. Slowly pull the casing up to remove it.
    • Slowly pull the casing up to remove it.

  3. Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物

    Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物
  4. Loosen the 10mm screw surrounded by the copper using a #2 Phillips head screwdriver.
    • Loosen the 10mm screw surrounded by the copper using a #2 Phillips head screwdriver.

    • The wire that connects the antenna to the circuitry of the truck might be blocking the screw. Take care when moving the wire out of the way not to pull it from its soldering.

  5. Carefully slide the antenna out from under the screw and remove.
    • Carefully slide the antenna out from under the screw and remove.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Colton Sholtis

于2015年01月30日注册

233 信誉积分

创作了2篇指南

团队

Cal Poly, Team 6-30, Amido Winter 2015 Cal Poly, Team 6-30, Amido Winter 2015 的会员

CPSU-AMIDO-W15S6G30

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 228