跳转到主内容

简介

This guide shows how to replace the back panel on a TomTom XXL 540.

  1. Using tweezers, peel back the sticker on the bottom of the device to reveal the two T5 screws. Use the T5 Torx screwdriver to unscrew the two T5 screws.
    • Using tweezers, peel back the sticker on the bottom of the device to reveal the two T5 screws.

    • Use the T5 Torx screwdriver to unscrew the two T5 screws.

  2. Use a flat edge screwdriver to pry open the faceplate.
    • Use a flat edge screwdriver to pry open the faceplate.

  3. Release the ribbon cable that connects the two sides.
    • Release the ribbon cable that connects the two sides.

  4. Identify the green motherboard.
    • Identify the green motherboard.

    • Use the T5 Torx screwdriver to unscrew the three T5 screws that hold the motherboard in place.

  5. Remove and disconnect the motherboard and battery from the back panel.
    • Remove and disconnect the motherboard and battery from the back panel.

  6. Attach the motherboard and battery to the new back panel.
    • Attach the motherboard and battery to the new back panel.

结论

To reassemble your device, follow these instructions in reverse order.

Mike Sollars

于2013年07月11日注册

489 信誉积分

创作了3篇指南

团队

WRI115, Team 1-1, Ruszkiewicz Spring 2013 WRI115, Team 1-1, Ruszkiewicz Spring 2013 的会员

WRI115-RUSZKIEWICZ-S13S1G1

4 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 31

总计 1,042