跳转到主内容

TomTom One XL Battery Replacement

你所需要的

  1. TomTom One XL Battery Replacement, Back Panel: 步骤 1 中的图像 1,2 TomTom One XL Battery Replacement, Back Panel: 步骤 1 中的图像 2,2
    • Remove the 4 .4mm screws on the back of the device.

  2. TomTom One XL Battery Replacement: 步骤 2 中的图像 1,1
    • Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.

    • You can rotate TOMTOM XL to make prying back off easier.

    • Be careful not to injure the two wires connecting the pieces.

  3. TomTom One XL Battery Replacement: 步骤 3 中的图像 1,1
    • After prying both halves apart, they will be connected by two wires.

    • Carefully set the two halves next to each other making sure not to stress or damage the wires.

  4. TomTom One XL Battery Replacement: 步骤 4 中的图像 1,2 TomTom One XL Battery Replacement: 步骤 4 中的图像 2,2
    • Using the tweezers separate the wires connecting the battery and speaker to the mother board.

    • Be gentle while pulling the wires out, the plugs are easily injured.

  5. TomTom One XL Battery Replacement, Battery: 步骤 5 中的图像 1,1
    • Using metal palate knife pry the battery from the back panel.

  6. TomTom One XL Battery Replacement: 步骤 6 中的图像 1,3 TomTom One XL Battery Replacement: 步骤 6 中的图像 2,3 TomTom One XL Battery Replacement: 步骤 6 中的图像 3,3
    • Place the backside of the battery on the sticky side of the double sided tape.

    • Using the tech knife, trim the extra tape to the size of the battery.

    • The tech knife is sharp, be careful when cutting the tape.

  7. TomTom One XL Battery Replacement: 步骤 7 中的图像 1,3 TomTom One XL Battery Replacement: 步骤 7 中的图像 2,3 TomTom One XL Battery Replacement: 步骤 7 中的图像 3,3
    • Remove the back of the double sided tap.

    • Place the new battery back inside the back panel of TOMTOM XL.

    • Make sure the wire from the battery is going in the correct direction.

  8. TomTom One XL Battery Replacement: 步骤 8 中的图像 1,3 TomTom One XL Battery Replacement: 步骤 8 中的图像 2,3 TomTom One XL Battery Replacement: 步骤 8 中的图像 3,3
    • Reconnect the battery ribbon cable to its port.

结论

To reassemble your device, follow these instructions in reverse order.

DeVhan

于03/11/15注册

401 声望

创作了4篇指南

团队

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 7

总计 1,451