修复你的物品 社区 商店

Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement

简介

Use this guide to replace the regulator assembly in your Titan Elite 3000 High Pressure Airless Sprayer.

你所需要的

  1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: 步骤 1 中的图像 1，3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: 步骤 1 中的图像 2，3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: 步骤 1 中的图像 3，3

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    • Lay the sprayer down horizontally before continuing.

    编辑

  2. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure control knob: 步骤 2 中的图像 1，1

    • Use a pick tool to scrape the red paint from the side of the pressure control knob.

    编辑

  3. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: 步骤 3 中的图像 1，2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: 步骤 3 中的图像 2，2

    • Use a 2 mm Allen wrench to loosen the control knob.

    编辑

  5. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: 步骤 4 中的图像 1，2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: 步骤 4 中的图像 2，2

    • Remove the pressure control knob.

    编辑

  6. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: 步骤 5 中的图像 1，3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: 步骤 5 中的图像 2，3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: 步骤 5 中的图像 3，3

    • Use a flathead screwdriver to pry and remove the clip securing the stop sleeve.

    • The stop sleeve will pop out slightly due to the compressed spring behind it.

    • During reassembly, compress the stop sleeve against the spring to fully insert the clip.

    编辑

  7. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the stop sleeve: 步骤 6 中的图像 1，2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the stop sleeve: 步骤 6 中的图像 2，2

    • Remove the stop sleeve.

    编辑

  8. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure spring: 步骤 7 中的图像 1，2 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure spring: 步骤 7 中的图像 2，2

    • Remove the pressure spring.

    编辑

  9. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: 步骤 8 中的图像 1，3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: 步骤 8 中的图像 2，3 Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: 步骤 8 中的图像 3，3

    • Use an adjustable wrench to remove the regulator assembly.

    • Your assembly may have red threadlocker around its threads.

    • During reassembly, consider applying new threadlocker to your replacement assembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

Alex Diaz-Kokaisl

于01/16/22注册

124,921 声望

创作了582篇指南

徽章: 34

+ 31更多徽章

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了17,392篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 6

过去 7 天： 15

过去 30 天： 38

总计 497