修复你的物品 社区 商店

Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement

简介

Use this guide to replace the seal assembly on your RX-80 spray gun.

For more safety information, refer to the Operating Manual.

你所需要的

  1. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Loosen the tip housing: 步骤 1 中的图像 1，2 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Loosen the tip housing: 步骤 1 中的图像 2，2

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before disassembling the spray gun.

    • Use an adjustable wrench to loosen the tip housing.

    编辑

  2. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the tip: 步骤 2 中的图像 1，2 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the tip: 步骤 2 中的图像 2，2

    • Remove the tip and tip guard assembly.

    编辑

  3. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Loosen the diffuser: 步骤 3 中的图像 1，2 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Loosen the diffuser: 步骤 3 中的图像 2，2

    • Use an adjustable wrench to loosen the diffuser.

    编辑

  5. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the diffuser: 步骤 4 中的图像 1，3 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the diffuser: 步骤 4 中的图像 2，3 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the diffuser: 步骤 4 中的图像 3，3

    • Pull the diffuser straight off the seal assembly to remove it.

    编辑

  6. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Loosen the rear housing: 步骤 5 中的图像 1，2 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Loosen the rear housing: 步骤 5 中的图像 2，2

    • Use an adjustable wrench to loosen the rear housing on the back of the spray gun.

    编辑

  7. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the rear housing: 步骤 6 中的图像 1，2 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the rear housing: 步骤 6 中的图像 2，2

    • Pull the rear housing straight off the spray gun to remove it.

    编辑

  8. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the lock nut: 步骤 7 中的图像 1，3 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the lock nut: 步骤 7 中的图像 2，3 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the lock nut: 步骤 7 中的图像 3，3

    • Use a 3/8 inch socket to loosen the lock nut from the back of the spray gun.

    • Pull the lock nut straight off the spray gun to remove it.

    编辑

  9. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement: 步骤 8 中的图像 1，2 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement: 步骤 8 中的图像 2，2

    • Use your fingers or a pick tool to remove the retractor plate and its two alignment pins from the spray gun.

    编辑

  10. Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the seal assembly: 步骤 9 中的图像 1，3 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the seal assembly: 步骤 9 中的图像 2，3 Titan Airless Sprayer IMPACT 410 RX-80 Spray Gun Seal Assembly Replacement, Remove the seal assembly: 步骤 9 中的图像 3，3

    • Pull the seal assembly through the front of the spray gun to remove it.

    • This may take a significant amount of force.

    • During reassembly, squeeze the trigger when reinstalling the seal assembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Alex Diaz-Kokaisl

于01/16/22注册

124,921 声望

创作了582篇指南

徽章: 34

+ 31更多徽章

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了17,392篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 14

过去 30 天： 56

总计 716