Tineco FLOOR ONE S3 Breeze Brush Roller Replacement - iFixit 维修指南

简介

The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.

步骤 1 Brush Roller

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: 步骤 1 中的图像 1，2

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: 步骤 1 中的图像 2，2

Place a finger on the lever located on the brush roller cover.
Firmly push the lever with a finger to remove the brush roller cover.

步骤 2

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement: 步骤 2 中的图像 1，1

Grasp the brush roller on its side.
Pull the brush roller out of its initial position.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Dawoud Daoud

于02/14/24注册

199 声望

创作了2篇指南

团队

University of Memphis, Team 3-5, Sneed Spring 2024 University of Memphis, Team 3-5, Sneed Spring 2024 的会员

UM-SNEED-S24S3G5

4 名成员

创作了6篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 8

总计 79