配件

  1. Here are the tools you will need:
    • Here are the tools you will need:

      • Standard Screwdriver

      • New Pannier Whole Clip Bracket

      • Wrench

    添加评论

  2. To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).
    • To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).

    添加评论

    • Unscrew all 13 small black screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • While holding nuts with the wrench, use the screwdriver to unscrew the screw in the front bracket.

    添加评论

    • Remove old clip. Take new clip bracket and unscrew and remove middle clip.

    添加评论

    • Replace the middle clip and screw it into place on the bag. Place the new clip bracket in place and screw in all 13 screws again.

    • As in step 3 and 4, hold nut with wrench while screwing clip in place. (Be sure to keep washers in between the screws and the body of the bag)

    添加评论

    • You're done!

    添加评论

终点

Emilee

于2014年03月13日注册

1,341 信誉积分

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 6

总计 999