跳转到主内容

修复你的物品

维修的权力

商店

  1. Power down the TiVo and detach the power cable from the rear of the unit.
    • Power down the TiVo and detach the power cable from the rear of the unit.

    • Wait 5 minutes for the unit to fully discharge before proceeding to the next step.

  2. Remove the five T10 screws from the rear of the case using the Torx screwdriver.
    • Remove the five T10 screws from the rear of the case using the Torx screwdriver.

  3. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  4. Lift up and pull back the outer casing towards the rear of the unit. Lift up and pull back the outer casing towards the rear of the unit.
    • Lift up and pull back the outer casing towards the rear of the unit.

  5. The fan is held in by four T15 screws on the rear of the device.
    • The fan is held in by four T15 screws on the rear of the device.

  6. Take the wound red and black wires coming from the fan and follow them back to the logic board. Unplug the connector from the motherboard.
    • Take the wound red and black wires coming from the fan and follow them back to the logic board.

    • Unplug the connector from the motherboard.

  7. Pull the fan towards the front and out of the TiVo unit. Pull the fan towards the front and out of the TiVo unit.
    • Pull the fan towards the front and out of the TiVo unit.

结论

To reassemble your device, follow these instructions in reverse order.

Svyatoslav Markeyev

于2010年04月16日注册

135 信誉积分

创作了5篇指南

团队

Cal Poly, Team 33-79, Johann Spring 2010 Cal Poly, Team 33-79, Johann Spring 2010 的会员

CPSU-JOHANN-S10S33G79

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 5,115