简介

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

配件

无需配件。

  1. Unscrew the five 0.31 inch T-9 screws on the back cover.
    • Unscrew the five 0.31 inch T-9 screws on the back cover.

  2. Slide the cover towards the back until it is no longer under the front cover.
    • Slide the cover towards the back until it is no longer under the front cover.

  3. Lift the cover up and off the device.
    • Lift the cover up and off the device.

  4. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. Locate the power supply.
    • Locate the power supply.

  6. Remove the belt connecting the power supply to the motherboard by pulling it out.
    • Remove the belt connecting the power supply to the motherboard by pulling it out.

  7. Remove the red, yellow, and black cable connecting the power supply to the hard drive.
    • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

  8. Remove the two 0.31 inch T-9 screws from the power supply.
    • Remove the two 0.31 inch T-9 screws from the power supply.

  9. Pinch the plastic plugs and lift the power supply up to detach from plugs. All 4 plugs must be detached to remove power supply.
    • Pinch the plastic plugs and lift the power supply up to detach from plugs.

    • All 4 plugs must be detached to remove power supply.

结论

To reassemble your device, follow these instructions in reverse order.

Phil Jones

于2011年10月11日注册

41 信誉积分

撰写一个指南

团队

Cal Poly, Team 5-33, Amido Fall 2011 Cal Poly, Team 5-33, Amido Fall 2011 的会员

CPSU-AMIDO-F11S5G33

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,059