简介

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

配件

无需配件。

  1. Unscrew the five 0.31 inch T-9 screws on the back cover.
    • Unscrew the five 0.31 inch T-9 screws on the back cover.

    添加评论

  2. Slide the cover towards the back until it is no longer under the front cover.
    • Slide the cover towards the back until it is no longer under the front cover.

    添加评论

    • Lift the cover up and off the device.

    添加评论

    • Locate the power supply.

    添加评论

    • Remove the belt connecting the power supply to the motherboard by pulling it out.

    添加评论

    • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

    添加评论

    • Remove the two 0.31 inch T-9 screws from the power supply.

    添加评论

    • Pinch the plastic plugs and lift the power supply up to detach from plugs.

    • All 4 plugs must be detached to remove power supply.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Phil Jones

于2011年10月11日注册

41 信誉积分

撰写一个指南

团队

Cal Poly, Team 5-33, Amido Fall 2011 Cal Poly, Team 5-33, Amido Fall 2011 的会员

CPSU-AMIDO-F11S5G33

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 1,049