-
Unscrew the five 0.31 inch T-9 screws on the back cover.
-
Slide the cover towards the back until it is no longer under the front cover.
-
Lift the cover up and off the device.
-
Locate the hard drive.
-
Remove the ribbon cable by applying firm pressure to the black tabs on the sides.
-
Remove the power cable to the right of the ribbon cable.
-
Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.
即将完成！
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
团队
Cal Poly, Team 5-33, Amido Fall 2011 Cal Poly, Team 5-33, Amido Fall 2011 的会员
CPSU-AMIDO-F11S5G33
4 名成员
创作了7篇指南
