简介

The battery acts as an internal power source for the device. In case this battery needs to be replaced, this simple guide will walk you through the steps of removing the current battery to replace it.

配件

无需配件。

  1. Unscrew the five 0.31 inch T-9 screws on the back cover.
    • Unscrew the five 0.31 inch T-9 screws on the back cover.

  2. Slide the cover towards the back until it is no longer under the front cover.
    • Slide the cover towards the back until it is no longer under the front cover.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Lift the cover up and off the device.
    • Lift the cover up and off the device.

  5. Locate the battery on the motherboard.
    • Locate the battery on the motherboard.

  6. Using the spudger, wedge the metal clip off of the top surface of the battery.
    • Using the spudger, wedge the metal clip off of the top surface of the battery.

  7. Use your finger to push the battery sideways out of its holder.
    • Use your finger to push the battery sideways out of its holder.

结论

To reassemble your device, follow these instructions in reverse order.

Cody Hunter

于2011年10月10日注册

22 信誉积分

创作了2篇指南

团队

Cal Poly, Team 5-33, Amido Fall 2011 Cal Poly, Team 5-33, Amido Fall 2011 的会员

CPSU-AMIDO-F11S5G33

4 名成员

创作了7篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 1,362