修复你的物品 社区 商店

TiVo Premiere XL4 Motherboard Replacement

简介

The motherboard keeps all function intact, whether start ups or shut downs, the motherboard sends the desired signal that you wish. If buttons do not work properly and send the correct signals, then the motherboard may be the problem and here is how to replace it.

你所需要的

  1. TiVo Premiere XL4 Motherboard Replacement, Case: 步骤 1 中的图像 1，1

    • Power down the TiVo Premiere XL4 by detaching the power cable from the unit and power source.

    • Allow the box to cool for at least 5 minutes before proceeding to the next step.

    编辑

  2. TiVo Premiere XL4 Motherboard Replacement: 步骤 2 中的图像 1，2 TiVo Premiere XL4 Motherboard Replacement: 步骤 2 中的图像 2，2

    • Remove the four 80 mm T10 screws from the back of the TiVo box using theTorx screwdriver.

    编辑

  3. TiVo Premiere XL4 Motherboard Replacement: 步骤 3 中的图像 1，1

    • Take the outer casing by sliding the top of the box off of the component carefully, making sure not to damage the surrounding components inside.

    编辑

  4. TiVo Premiere XL4 Motherboard Replacement, Motherboard: 步骤 4 中的图像 1，1

    • Remove the single 140 mm T8 screw from the back panel using a Torx screwdriver.

    编辑

  5. TiVo Premiere XL4 Motherboard Replacement: 步骤 5 中的图像 1，2 TiVo Premiere XL4 Motherboard Replacement: 步骤 5 中的图像 2，2

    • Unplug the wire of the fan by gently squeezing the connector and lifting up.

    编辑

  6. TiVo Premiere XL4 Motherboard Replacement: 步骤 6 中的图像 1，1

    • Remove the power supply wire by pinching the plastic connection and gently pulling away from the motherboard.

    编辑

  8. TiVo Premiere XL4 Motherboard Replacement: 步骤 7 中的图像 1，1

    • Remove the single 80 mm T10 screw above HDMI port using the Torx screwdriver.

    编辑

  9. TiVo Premiere XL4 Motherboard Replacement: 步骤 8 中的图像 1，1

    • Remove wire connected to the front of of the box by pinching the connector and gently removing from the motherboard.

    编辑

  10. TiVo Premiere XL4 Motherboard Replacement: 步骤 9 中的图像 1，2 TiVo Premiere XL4 Motherboard Replacement: 步骤 9 中的图像 2，2

    • Remove two 100 mm T10 screws connecting the front cover to the hardware of the box using a Torx screwdriver.

    • Unplug the connector from the front panel.

    编辑

  11. TiVo Premiere XL4 Motherboard Replacement: 步骤 10 中的图像 1，1

    • Remove the front of the TiVo.

    • This step helps with the process of removing the motherboard due to the plastic prongs putting pressure on the board.

    编辑

  12. TiVo Premiere XL4 Motherboard Replacement: 步骤 11 中的图像 1，1

    • Using pliers, be sure that the cable jack is centered with the back of the box for easy removal.

    • This step above is only necessary if it is not aligned.

    • Remove the nut on the cable jack using pliers.

    • Remove the washer after removing the nut.

    编辑

  13. TiVo Premiere XL4 Motherboard Replacement: 步骤 12 中的图像 1，3 TiVo Premiere XL4 Motherboard Replacement: 步骤 12 中的图像 2，3 TiVo Premiere XL4 Motherboard Replacement: 步骤 12 中的图像 3，3

    • Remove the following (2) 80 mm T10 screws including the (2) 80 mm T10 screws located on the other side using the Torx Screwdriver.

    • Remove hard drive from on top of the motherboard.

    编辑

  14. TiVo Premiere XL4 Motherboard Replacement: 步骤 13 中的图像 1，3 TiVo Premiere XL4 Motherboard Replacement: 步骤 13 中的图像 2，3 TiVo Premiere XL4 Motherboard Replacement: 步骤 13 中的图像 3，3

    • Pinch the connector of the bundle of wires (the bundle having black, red, black and yellow wires) and gently remove from the motherboard.

    • Pinch the connector of the single flat red wire and gently remove from motherboard.

    编辑

  15. TiVo Premiere XL4 Motherboard Replacement: 步骤 14 中的图像 1，2 TiVo Premiere XL4 Motherboard Replacement: 步骤 14 中的图像 2，2

    • Remove the two 200 mm screws holding the motherboard in place to the bottom of the box using pliers.

    编辑

  16. TiVo Premiere XL4 Motherboard Replacement: 步骤 15 中的图像 1，1

    • Remove the six 80 mm T10 screws using the Torx Screwdriver.

    编辑

  17. TiVo Premiere XL4 Motherboard Replacement: 步骤 16 中的图像 1，1

    • Remove the motherboard from the box.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Frances Prewitt

于10/22/18注册

661 声望

创作了6篇指南

徽章: 7

+ 4更多徽章

团队

Baylor, Team S1-G1, Williams Fall 2018 Baylor, Team S1-G1, Williams Fall 2018 的会员

BU-WILLIAMS-F18S1G1

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 6

总计 534