跳转到主内容

Thustmaster Ferrari 458 Spider Racing Wheel and Pedal Connection Port Replacement

你所需要的

  1. Thustmaster Ferrari 458 Spider Racing Wheel and Pedal Connection Port Replacement, Bottom Cover: 步骤 1 中的图像 1,1
    • Remove the black 10mm using a JIS #1 screw driver.

    • There are 12 screws.

    • Two of the screws are deep inside the device you might need to use a slim screwdriver.

    • In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.

  2. Thustmaster Ferrari 458 Spider Racing Wheel and Pedal Connection Port Replacement: 步骤 2 中的图像 1,2 Thustmaster Ferrari 458 Spider Racing Wheel and Pedal Connection Port Replacement: 步骤 2 中的图像 2,2
    • Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.

    • Gently pull apart both halves of device to access inside.

  3. Thustmaster Ferrari 458 Spider Racing Wheel and Pedal Connection Port Replacement, Wheel and Pedal Connection Port: 步骤 3 中的图像 1,2 Thustmaster Ferrari 458 Spider Racing Wheel and Pedal Connection Port Replacement, Wheel and Pedal Connection Port: 步骤 3 中的图像 2,2
    • Using a small plastic opening tool, gently pry up the white connector that connects the pedals to the board.

    • By pulling up on both ends of the port you will be able to pull out the port to remove it.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Mario Nunez

于10/18/17注册

421 声望

创作了3篇指南

团队

USF Tampa, Team S1-G33, Cagle Fall 2017 USF Tampa, Team S1-G33, Cagle Fall 2017 的会员

USFT-CAGLE-F17S1G33

4 名成员

创作了5篇指南

2条评论

I just need to know where to get a replacement USB cable from ( the USB to the circular end part).

TheComfyCompie - 回复

I need to know what USB cable connects the round cable end on the steerwheel to the Xbox one

Susan Witter - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 5

过去 30 天: 28

总计 5,415