Thrustmaster T3PM Maintenance

步骤 1 Disconnect the pedal heads

Thrustmaster T3PM Maintenance, Disconnect the pedal heads: 步骤 1 中的图像 1，2

Thrustmaster T3PM Maintenance, Disconnect the pedal heads: 步骤 1 中的图像 2，2

Unscrew all 6 screws from the pedal heads
Note the positioning of the pedal heads or take this opportunity to try out new position
Before starting, unplug your T3PM.

编辑

步骤 2 Remove screws from the bottom

Thrustmaster T3PM Maintenance, Remove screws from the bottom: 步骤 2 中的图像 1，1

Using Phillips screwdriver remove all screws at the bottom.

编辑

步骤 3 Remove the top cover

Thrustmaster T3PM Maintenance, Remove the top cover: 步骤 3 中的图像 1，1

Remove the top cover and put it aside

编辑

步骤 4 Remove any dust and other residue from the general area.

Clean off any dust, residue, pet hair and other foreign debris that has accumulated inside the pedal set.

编辑

步骤 5 Inspect the wires and tape.

Thrustmaster T3PM Maintenance, Inspect the wires and tape.: 步骤 5 中的图像 1，2

Thrustmaster T3PM Maintenance, Inspect the wires and tape.: 步骤 5 中的图像 2，2

Make sure that the wires and the main cable are secure.
Replace sticky tape if necessary.

编辑

步骤 6 Thoroughly clean each pedal.

Thrustmaster T3PM Maintenance, Thoroughly clean each pedal.: 步骤 6 中的图像 1，1

Clean off any dust, residue, pet hair etc from the pedals themselves, near the sensors and springs.
Make sure to clean off the extremities of the pedals.

编辑

步骤 7 Clean the sensors

Thrustmaster T3PM Maintenance, Clean the sensors: 步骤 7 中的图像 1，2

Thrustmaster T3PM Maintenance, Clean the sensors: 步骤 7 中的图像 2，2

Using an air-blower, compressed air-can or other tool, clean the sensors.
Be cautions as to not damage the sensors, wires or the connectors.
Watch out for Electro-static Discharge. Make sure not to touch the sensors or use anti-static wrist strap.

编辑

步骤 8 Inspect the springs.

Thrustmaster T3PM Maintenance, Inspect the springs.: 步骤 8 中的图像 1，1

Inspect the conditions of the gas and clutch springs.
Re-lubricate if necessary.