跳转到主内容

简介

This guide will teach you how to properly replace the batteries in your Claw Machine. If you are experiencing any power related issues with your device follows these steps.

  1. Hold The Claw machine upright so that the controls are facing you.
    • Hold The Claw machine upright so that the controls are facing you.

  2. Turn the device upside down keeping the controls facing in your direction.
    • Turn the device upside down keeping the controls facing in your direction.

  3. Locate the battery compartment door on the bottom cover of The Claw.
    • Locate the battery compartment door on the bottom cover of The Claw.

    • Loosen the screw from the battery compartment door with your phillips head screwdriver.

  4. Open the door and insert the 3 D-cell batteries using the correct configuration that is labeled on the inside of the compartment.
    • Open the door and insert the 3 D-cell batteries using the correct configuration that is labeled on the inside of the compartment.

    • If the batteries are not placed in the right configuration the device will not operate. make sure to identify positive and negative sides of the battery and follow the configuration on the device.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Alain Pierre

于2016年03月22日注册

1,149 信誉积分

创作了9篇指南

团队

UMass Dartmouth, Team 4-8, Catania Spring 2016 UMass Dartmouth, Team 4-8, Catania Spring 2016 的会员

UMASSD-CATANIA-S16S4G8

3 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 8

过去的30天: 27

总计 940