修复你的物品 社区 商店

The Beatles Rock Band Drum Set Drum Pad Replacement

简介

Before beginning the drum pad replacement. Remember to be careful when following the steps. The drum pads may seem difficult to pry off at first, but just remember that it is okay to apply more force if needed as long as its applied responsibly. Play close attention to the specific wires and parts that are being emphasized in the steps.

你所需要的

  1. The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: 步骤 1 中的图像 1，2 The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: 步骤 1 中的图像 2，2

    • Pry the drum pad off of the drum set.

    • This will take significant force, but the rubber on the drum pad can withstand the force.

    编辑

  2. The Beatles Rock Band Drum Set Drum Pad Replacement: 步骤 2 中的图像 1，2 The Beatles Rock Band Drum Set Drum Pad Replacement: 步骤 2 中的图像 2，2

    • Remove the small wire clip shown in the picture.

    • If this wire is already disconnected, that is most likely the cause for the drum pad not working.

    编辑

  4. The Beatles Rock Band Drum Set Drum Pad Replacement: 步骤 3 中的图像 1，1

    • Remove the four Phillips size J0 screws supporting the hit sensor.

    • There is a small plastic disk and a spring in the support; be sure not to lose it.

    编辑

  5. The Beatles Rock Band Drum Set Drum Pad Replacement: 步骤 4 中的图像 1，1

    • The sensor can be peeled off of the drum pad.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

Zach Richter

于01/24/17注册

549 声望

创作了5篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 13-3, Banghart Winter 2017 Cal Poly, Team 13-3, Banghart Winter 2017 的会员

CPSU-BANGHART-W17S13G3

4 名成员

创作了5篇指南

一条评论

Where can you buy replacement sensor?

Barry Howard - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 14

过去 30 天： 67

总计 7,911