修复你的物品 社区 商店

Texas Instruments TI-92 Backup Battery Replacement

简介

In this guide we will be replacing the backup battery for the TI-92.

你所需要的

  1. Texas Instruments TI-92 Backup Battery Replacement, Back Cover: 步骤 1 中的图像 1，3 Texas Instruments TI-92 Backup Battery Replacement, Back Cover: 步骤 1 中的图像 2，3 Texas Instruments TI-92 Backup Battery Replacement, Back Cover: 步骤 1 中的图像 3，3

    • The first step to any repair operation is to remove the front cover.

    • Grab the back of the calculator with one hand and the cover with the other.

    • Pull the cover off from one of the sides for easy removal.

    编辑

  2. Texas Instruments TI-92 Backup Battery Replacement: 步骤 2 中的图像 1，2 Texas Instruments TI-92 Backup Battery Replacement: 步骤 2 中的图像 2，2

    • Orientate the calculator with the top facing towards you.

    • Slide the locking tab,found on the top part of the calculator, to the unlock position.

    编辑

  3. Texas Instruments TI-92 Backup Battery Replacement: 步骤 3 中的图像 1，2 Texas Instruments TI-92 Backup Battery Replacement: 步骤 3 中的图像 2，2

    • "Locking Tab"

    • To remove the back cover, slide the cover away from the locking tab towards the bottom of the calculator until the cover no longer slides.

    • Then with the front of the calculator facing down, pull up on the back cover.

    • The calculator should now be orientated with the front facing down, as shown in picture 2.

    编辑

  5. Texas Instruments TI-92 Backup Battery Replacement, Backup Battery: 步骤 4 中的图像 1，1

    • Before removing the backup battery make sure your AA batteries are installed so that there is no loss of information.

    • Using a #00 Philip Screwdriver remove the 19mm screw located near the center of the back of the calculator on the panel with words "Test Access"

    编辑

  6. Texas Instruments TI-92 Backup Battery Replacement: 步骤 5 中的图像 1，1

    • Remove the screw and lift the panel to access battery.

    编辑

  7. Texas Instruments TI-92 Backup Battery Replacement: 步骤 6 中的图像 1，2 Texas Instruments TI-92 Backup Battery Replacement: 步骤 6 中的图像 2，2

    • The backup battery can now be seen underneath a small metal cover held by a screw.

    • Using the same screwdriver, unscrew the 4.6mm screw located under the panel and left of the backup battery.

    编辑

  8. Texas Instruments TI-92 Backup Battery Replacement: 步骤 7 中的图像 1，3 Texas Instruments TI-92 Backup Battery Replacement: 步骤 7 中的图像 2，3 Texas Instruments TI-92 Backup Battery Replacement: 步骤 7 中的图像 3，3

    • Remove the metal cover keeping the backup battery in place.

    编辑

  9. Texas Instruments TI-92 Backup Battery Replacement: 步骤 8 中的图像 1，2 Texas Instruments TI-92 Backup Battery Replacement: 步骤 8 中的图像 2，2

    • Use an Ipod Opening Tool or a similar tool to pull up on the right side of the backup battery.

    • The battery should pop out of position.

    编辑

  10. Texas Instruments TI-92 Backup Battery Replacement: 步骤 9 中的图像 1，2 Texas Instruments TI-92 Backup Battery Replacement: 步骤 9 中的图像 2，2

    • After the battery has been tilted out of its socket, simply remove it with your hands.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与5其他贡献者

Daniel Maldonado

于04/14/10注册

240 声望

创作了9篇指南

徽章: 14

+ 11更多徽章

团队

Cal Poly, Team 15-51, Garner Spring 2010 Cal Poly, Team 15-51, Garner Spring 2010 的会员

CPSU-GARNER-S10S15G51

5 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 4

总计 5,097