跳转到主内容

修复你的物品

维修的权力

商店

简介

If your Teddy Ruxpin is not turning on you may need to replace the battery. This is a replacement guide for removing the batteries from the Teddy Ruxpin model #17262DS. For this guide, you will need four double AA batteries and a Phillips #2 screwdriver head. This replacement guide should be quick and easy.

  1. Remove the vest covering the back of the bear. Orient the bear with his back facing upwards and unscrew the single Phillips #2 screw.
    • Remove the vest covering the back of the bear.

    • Orient the bear with his back facing upwards and unscrew the single Phillips #2 screw.

    • Captured screws will stay in place, no need to worry about losing this one!

  2. Pull the tab outward to remove the protective plate for the batteries.
    • Pull the tab outward to remove the protective plate for the batteries.

  3. Remove all four AA batteries by pushing the positive end down and pulling the battery out toward yourself.
    • Remove all four AA batteries by pushing the positive end down and pulling the battery out toward yourself.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Lauren

于2020年01月23日注册

208 信誉积分

创作了2篇指南

团队

Cal Poly, Team S18-G5, White Winter 2020 Cal Poly, Team S18-G5, White Winter 2020 的会员

CPSU-WHITE-W20S18G5

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 15

过去的30天: 86

总计 606