简介

This guide will help you replace your faulty volume knob. This guide should only be looked at after completing the Disassembly Guide.

配件

无需配件。

  1. Remove the screws that are holding the circuit board in place. Remove the screws that are holding the circuit board in place.
    • Remove the screws that are holding the circuit board in place.

  2. Pull the circuit board out to reveal the inside of the display. Pull the circuit board out to reveal the inside of the display.
    • Pull the circuit board out to reveal the inside of the display.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place.
    • Remove the screws and the black piece that are holding the volume control knob in place.

  5. Pull the volume control knob from the outside and the white piece on the inside until they separate. Replace the volume knob with a new one to complete the repair.
    • Pull the volume control knob from the outside and the white piece on the inside until they separate.

    • Replace the volume knob with a new one to complete the repair.

结论

To reassemble your device, follow these instructions in reverse order and follow the disassembly guide instructions in reverse order.

2等其他人完成本指南。

Oliver Kunz

于2012年09月26日注册

107 信誉积分

撰写一个指南

团队

Cal Poly, Team 2-61, Propen Fall 2012 Cal Poly, Team 2-61, Propen Fall 2012 的会员

CPSU-PROPEN-F12S2G61

4 名成员

创作了5篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 21

总计 3,340