简介

The stylus, which actually reads the record and transmits the signal, wears out over time. According to the TEAC manual for this device, that should be around 50 hours. Replacing or cleaning the stylus will help improve sound quality if done correctly, but should be done very carefully.

  1. Turn off record the player before making repairs. Unplug the record player.
    • Turn off record the player before making repairs.

    • Unplug the record player.

  2. Open the lid to access the turntable, arm, and stylus. Open the lid to access the turntable, arm, and stylus.
    • Open the lid to access the turntable, arm, and stylus.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Press down on the front of the red stylus and pull forward to remove it from the arm.
    • Press down on the front of the red stylus and pull forward to remove it from the arm.

  5. Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.
    • Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.

终点

另外一个人完成了本指南。

Charles Lockner

于2012年09月17日注册

103 信誉积分

创作了2篇指南

团队

Cal Poly, Team 2-61, Propen Fall 2012 Cal Poly, Team 2-61, Propen Fall 2012 的会员

CPSU-PROPEN-F12S2G61

4 名成员

创作了5篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 14

总计 1,248