修复你的物品 社区 商店

Tapwave T2907US Zodiac 2 Directional Pad Replacement

简介

Use this guide when the directional pad needs to be replaced.

你所需要的

  1. Tapwave T2907US Zodiac 2 Directional Pad Replacement, Back Cover: 步骤 1 中的图像 1，1

    • Remove the four Torx T5 screws from the back panel.

    编辑

  2. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 2 中的图像 1，1

    • Wedge a spudger in between the front and back panel.

    • Apply leverage downwards to the spudger in order to remove the back panel.

    编辑

  3. Tapwave T2907US Zodiac 2 Directional Pad Replacement, Battery: 步骤 3 中的图像 1，1

    • Slide the battery out from under the brown wire-tape.

    • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

    编辑

  4. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 4 中的图像 1，1

    • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

    编辑

  6. Tapwave T2907US Zodiac 2 Directional Pad Replacement, Directional Pad: 步骤 5 中的图像 1，1

    • Unscrew the 2 Philips #00 screws on each end of the motherboard.

    编辑

  7. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 6 中的图像 1，1

    • Pull off the black memory card slot piece.

    编辑

  8. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 7 中的图像 1，1

    • Unscrew the 2 Philips #00 screws on each side of the charging port.

    编辑

  9. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 8 中的图像 1，2 Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 8 中的图像 2，2

    • Disconnect 2 brown wire-tape ends from each end of the motherboard. Gently pull straight out with tweezers.

    编辑

  10. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 9 中的图像 1，1

    • Grasp the upper left edge of the motherboard and slide diagonally up and left away from the auxiliary port entrance.

    • Glue connecting the port to the casing may make it difficult to remove. Gently apply force as needed.

    编辑

  11. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 10 中的图像 1，1

    • Unscrew the 2 silver Philips #00 screws from both sides of the directional pad component on the front casing.

    编辑

  12. Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 11 中的图像 1，2 Tapwave T2907US Zodiac 2 Directional Pad Replacement: 步骤 11 中的图像 2，2

    • Take out the 2 pieces of the directional pad with tweezers.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与5其他贡献者

Daniel Wiseman

于01/20/12注册

133 声望

创作了6篇指南

徽章: 9

+ 6更多徽章

团队

Cal Poly, Team 10-33, Amido Winter 2012 Cal Poly, Team 10-33, Amido Winter 2012 的会员

CPSU-AMIDO-W12S10G33

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 4

总计 634