简介

Use this guide when you need to replace the battery because it has died.

配件

无需配件。

Remove the four Torx T5 screws from the back panel.
  • Remove the four Torx T5 screws from the back panel.

添加评论

Wedge a spudger in between the front and back panel.
  • Wedge a spudger in between the front and back panel.

  • Apply leverage downwards to the spudger in order to remove the back panel.

添加评论

Slide the battery out from under the brown wire-tape.
  • Slide the battery out from under the brown wire-tape.

    • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

添加评论

Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.
  • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

添加评论

终点

另外一个人完成了本指南。

Daniel Wiseman

于2012年01月20日注册

127 信誉积分

创作了6篇指南

团队

Cal Poly, Team 10-33, Amido Winter 2012 Cal Poly, Team 10-33, Amido Winter 2012 的会员

CPSU-AMIDO-W12S10G33

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 5

总计 689