1. Remove the four Torx T5 screws from the back panel.
    • Remove the four Torx T5 screws from the back panel.

    添加评论

  2. Wedge a spudger in between the front and back panel.
    • Wedge a spudger in between the front and back panel.

    • Apply leverage downwards to the spudger in order to remove the back panel.

    添加评论

    • Slide the battery out from under the brown wire-tape.

      • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

    添加评论

    • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

    添加评论

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Unscrew the 2 Philips #00 screws on each end of the motherboard.

    添加评论

    • Pull off the black memory card slot piece with tweezers.

    添加评论

    • Unscrew the 2 Philips #00 screws on each side of the charging port.

    添加评论

    • Disconnect 2 brown wire-tape ends from each end of the motherboard. Gently pull straight out with tweezers.

    添加评论

    • Pull the motherboard and screen component diagonally up and left away from the auxiliary port entrance to remove.

    • Glue connecting the auxiliary port to the casing may make it difficult to remove. Gently apply force as needed.

    添加评论

    • Disconnect the 2 brown wire-tape ends from the left side of the battery slot on the motherboard using tweezers.

    添加评论

    • Disconnect the large brown wire-tape from the motherboard.

      • Peel the black tape back from the wire-tape using tweezers.

      • Lift the black, hinged, plastic lock with tweezers to release the wire-tape.

      • The screen and motherboard components can now be separated from each other.

    添加评论

    • Use tweezers to remove analog stick straight upwards from its component on the motherboard.

    • It should lock into place when installing a new one.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Daniel Wiseman

于2012年01月20日注册

127 信誉积分

创作了6篇指南

团队

Cal Poly, Team 10-33, Amido Winter 2012 Cal Poly, Team 10-33, Amido Winter 2012 的会员

CPSU-AMIDO-W12S10G33

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 705